Laboratory Clamps And Supports

Product Detail

For the stand for the BT600FC /YZ1515x for 1 channel :

SMN1-1(1 pc) +SMN2-4(3 pcs)+SMN3-2(1 pc)+SMN4-1(1 pc)    USD60 per set




For the stand for the SG600FC /YZ35 for 1 channel :

SMN1-2(1 pc) +SMN2-4(3 pcs)+SMN3-3(1 pc)+SMN4-2(1 pc)   USD100 per set




Other inquiry for multi-channel stand, pls send mail to sales01@crpump.com







Filling Stand (1)


Photo	Name	Model No.	Technical Prameters/Functions	Length(mm)/weight (kg)	Quotation
	Stainless steel frame tube	SMN1-1	OD1/2”, thickness wall 1/16”;	250	Welcome your mail or call enquiry.
		SMN1-2		500
		SMN1-3		750
	Open-sided frame clamp	SMN2-1	This connector has two open sides for rods at the angel to each other and accepts rods up to ID13mm
	T-joint frame	SMN2-2	One end has an open side that will clamp on a rod up to ID13mm.Other end has a female socket ID 19mm deep that will take a male connector ,or the butt end of a rod,up to 13mm.
	In-line  frame clamp	SMN2-3	Each end of connector has a female socket 19mm.It will join two13mm rods, a rod and a male connector, or two male connectors in line end-to-end
	Parallel frame clamp	SMN-4	The connector holds rods or clamp shemps up toID13mm and 2 rods held at right angle to each other
	Rectangular base	SMN3-1	Supports four rods or clamp, includes two thumbscrews.	230*156, weight 1.8kg.
	Small V-base	SMN3-2	Supports one rods including one thumbscrew	0.7kg
	Large v-base	SMN3-3	Supports one rods including one thumbscrew	1.7kg

Filling Stand (2)

Photo	Name	Model No.	Technical Prameters/Functions		Length(mm)/weight (kg)	Quotation
	Scaffold foot	SMN3-4	Holds one rod at a right angel surface ;includes one thumbscrew and three wood-mounting screws.			Welcome your mail or call enquiry.
	Mounting foot	SMN3-5	Holds one rod parallel to surface; includes one thumbscrew and two wood-mounting screws.
	Small Clamp	SMN4-1	Open to 16mm	Clamps hold instruments and glassware
	Medium Clamp	SMN4-2	Open to45mm
	Large Clamp	SMN4-3	Open to 85
	Small vise	SMN4-4	Open to 76mm	Securely hold boards and thin sections such dishes ,rulers,filters ,etc.
	Board Clamp	SMN4-5	Open to 8.5mm
	Replacement thumb screw	SMN6	Replacement thumbscrews fit all frame clamps and bases.